Underwriters Laboratories Network IR Speed Dome Camera Bedienungsanleitung PDF herunterladen (Seite 63)

User Manual of Network Camera

6.6 Configuring and Handling Alarms

This section explains how to configure the network camera to respond to alarm events,

including motion detection, video tampering, alarm input, alarm output, exception, etc.

These events can trigger the alarm actions, such as Notify Surveillance Center, Send

Email, Trigger Alarm Output, etc.

Notes:

 Check the checkbox of Notify Surveillance Center if you want to the alarm

information pushed to your mobile phone as soon as the alarm is triggered.

6.6.1 Configuring Motion Detection

Purpose:

Motion detection detects the moving objects in the configured surveillance area, and

triggers the certain action as a respond to detection.

In order to detect the moving objects accurately and reduce the false alarm rate,

normal configuration and expert configuration are selectable for different motion

detection environment.

 Normal Configuration

Normal configuration adopts one set of parameter for motion detection during the day

and at night.

Tasks:

1. Set the Motion Detection Area.

Steps:

(1)Enter the motion detection settings interface

Configuration > Advanced Configuration> Events > Motion Detection

(2)Check the checkbox of Enable Motion Detection.

(3)Check the checkbox of Enable Dynamic Analysis for Motion if you want to

mark the detected objects with green rectangles.

Note: Select Disable for rules if you don‟t want the detected objected

displayed with the rectangles. Select disable from Configuration-Local

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 99 100

Keine Kommentare

Underwriters Laboratories Network IR Speed Dome Camera Bedienungsanleitung Seite 63