Underwriters Laboratories Network IR Speed Dome Camera Bedienungsanleitung PDF herunterladen (Seite 47)

User Manual of Network Camera

Figure 6-17 Configure UPnP Settings

6.3.9 Email Sending Triggered by Alarm

Purpose:

The system can be configured to send an Email notification to all designated receivers

if an alarm event is detected, e.g., motion detection event, video loss, video tampering,

etc.

Before you start:

Please configure the DNS Server settings under Basic Configuration > Network >

TCP/IP or Advanced Configuration > Network > TCP/IP before using the Email

function.

Steps:

1. Enter the TCP/IP Settings (Configuration > Basic Configuration > Network >

TCP/IP or Configuration > Advanced Configuration > Network > TCP/IP) to

set the IPv4 Address, IPv4 Subnet Mask, IPv4 Default Gateway and the Preferred

DNS Server.

Note: Please refer to Section 6.3.1 Configuring TCP/IP Settings for detailed

information.

2. Enter the Email Settings interface:

Configuration > Advanced Configuration > Network > Email

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 99 100

Keine Kommentare

Underwriters Laboratories Network IR Speed Dome Camera Bedienungsanleitung Seite 47